Bilgin Kaftanoğlu, Prof. Dr.

Bilgin Kaftanoğlu

Contact Information

Phone:8857
Office:İ 201
Home Department:
Detailed CV

Academic Degrees

DegreeFieldUniversityYear
PhD of Philosophy Manufacturing Engineering University of London, Imperial College 1966
Master's of Science Applied Mechanics University of London, Imperial College 1961
Bachelor's of Science Mechanical Engineering Middle East Technical University 1960


Academic Titles

DegreeUniversityMonthYear
Professor ATILIM UNIVERSITY September 2008
Professor OKLAHOMA STATE UNIVERSITY August 1981
Professor MIDDLE EAST TECHNICAL UNIVERSITY September 1980
Assoc. Prof. MIDDLE EAST TECHNICAL UNIVERSITY September 1973
Asst. Prof. MIDDLE EAST TECHNICAL UNIVERSITY August 1969
Asst. Prof. OTTAWA UNIVERSITY September 1967


Research Topics

Fastener Production, CAD/CAM, Wire-Rod Drawing / Forward Rod Extrusion, Forging, Extrusion, Strech Forming, Rolling, Computational Mechanics, Manufacturing Tribology, Solid Mechanics, Bulk Metal Forming, Machine Design, Material Models, Mechanical Characterization, Friction In Metal Forming Process, Metal Forming Theory And Technology, Robotics, Sheet Metal Forming, Manufacturing Methods, Coating and Characterization, Lubricants


Publications

SCI, SCI-E, SSCI and AHCI

Y.Karpat, N. Polat (2013), Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools, CIRP Annals- Manufacturing Technology

Kaftanoğlu B., Celik, G., Karadogan C., (2011), Investigation of Influence Parameters on Forming Limit Diagrams of Aluminum Alloy-AA2024,, Trans Tech Publications, Switzerland , 473, pp 382-389

Kaftanoğlu B., Taylan O., Baker D., (2011), Normalized Thermodynamic Model for Intermittent Energy Systems and Application to Solar-Powered Adsorption Cooling Systems., International Journal of Thermodynamics, 14, pp. 107-115.

Kaftanoğlu B., Özel T., Thepsonthi T., Ulutan D., (2011), Experiments and Finite Element Simulations on Micro-Milling of Ti-6Al-4V Alloy with Uncoated and cBN coated Tools,, CIRP-Annals- Manufacturing Technology (Elsevier), , 60, pp. 85- 88

Kaftanoğlu B., Solmuş, İ.,Rees, D.A.S., Yamalı, C., Baker, D., (2011), Numerical Investigation of Coupled Heat and Mass Transfer Inside the Adsorbent Bed of an Adsorption Cooling Unit,, International Journal of Refrigeration,

Kaftanoğlu B., Solmuş İ., Yamalı C.,Baker D.,Çağlar A. (2010), Adsorption Properties of a Natural Zeolite-Water Pair for use in Adsorption Cooling Cycles, Applied Energy, 87, pp.2062-2067

Kaftanoğlu B., Özel T., Sima M., Srivastava A. K. (2010), Investigations on the Effects of Multi-Layered Coated Inserts in Machining Ti-6Al-4V Alloy with Experiments and Finite Element Simulations, CIRP ANNALS 2010

Kaftanoğlu B., Taylan O., Baker D., (2010), COP Trends for Ideal Thermal Wave Adsorption Cooling Cycles with Enhancements., International Journal of Refrigeration.

Kaftanoğlu B., Fırat M., Eser O. (2008), Sheet Metal Forming Analyses with an Emphasis on the Springback Deformation, Journal of Materials Processing Technology, 196, pp.135-148

Kaftanoğlu B., Özel T., Karpat Y., Srivastava A. (2008), Hard Turning with Variable Micro-Geometry PcBN Tool, Annals of the CIRP, 57

Kaftanoğlu B., Lazoglu I., Ulutan D., Alaca B. E., Engin S. (2008), An Enhanced Analytical Model for Residual Stress Prediction in Machining, Annals of the CIRP, 57

Kaftanoğlu B., Baker D.K. (2007), Predicted Impact of Collector and Zeolite Choice on the Thermodynamic and Economic Performance of a Solar Powered Adsorption Cooling System, Experimental Heat Transfer Journal, 20:2, pp.103-122

Other Refereed Journals

Kaftanoğlu B. (2012), Kübik Bor Nitrür Kaplamalar, TIAD-TT Magazin, pp. 46-48

Kaftanoğlu B. (2012), Bir Ülkenin Sanayi Gelişim Süreci, MOMENT-EXPO Dergisi, 49, pp: 24-25

Kaftanoğlu B. (2012), Yenilikçilik ( Innovation ) ve Teknolojik Gelişme, Cumhuriyet Gazetesi

Kaftanoğlu B. (2012), Mühendisliğin Gelişmesi ve İmalat Mühendisliği

Şahin E., Albayrak K., Biçkes A., Başeşme E., (2012), Design and Manufacturing of an Industrial Type Electro-Hydraulic Vacuum Sweeper, 15th ınternational Conference on Machine Design and Production, Pamukkale, Denizli, Turkey

Şanay B., (2011), Prediction of Plastic Instability and Forming Limits in Sheet Metal Forming, 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, TURKEY, pp. 43-50

Kaftanoğlu B., Şanay B., (2011), Sac Metal Şekillendirmesinde Plastik Kararsızlık ve Şekillendirme Limitlerinin Belirlenmesi,, Makina Tasarım ve İmalat Dergisi

Kaftanoğlu B., Yalcin S., (2011), Derin Çekme İşlemlerinde Plastik Buruşma Analizi ve Modellemesi,, Makina Tasarım ve İmalat Dergisi,

Kaftanoğlu B., Çelik, G., Karadogan C., (2011), AA2024 Alüminyum Alaşımı için Şekillendirilebilme Sınır Diyagramlarını Etkileyen Parametrelerin İncelenmesi,, Makina Tasarım ve İmalat Dergisi,

Kaftanoğlu B., Cesur H., Kalkanli A., Oral B. (2009), Bor nitrür kaplamaların çelik alttaşlar üzerinde RF magnetron saçtırma yöntemiyle büyütülmesi, Makine Tasarım İmalat Dergisi, 11, 15-22

Kaftanoğlu B., Cesur H. (2008), Deposition of boron nitride coatings on steel substrates by rf magnetron sputtering, 7th International Conference on Coatings, Thessaloniki,

International Conference Proceedings

N. Dökmetaş (2013), Boron Nitride (BN) Coating of Tools and Dies to Improve Performance, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds June 20-23, Dedeman Hotel & Convention Center, Antalya, TURKEY

Y.Karpat, N. Polat (2013), Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools, CIRP Annals- Manufacturing Technology, presented at 63 rd CIRP General Assemby, Copenhagen , Denmark.

Cesur H., Dökmetaş N., (2012), Cubic Boron Nitride (CBN) Coating of Tools and Dies, SERES’11 ‘II. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment Congress, Eskişehir, Turkey

Dökmetaş N., (2012), CBN Kaplamalar, 17. Uluslararası Bor, Borür ve İlgili Malzemeler Sempozyumu, Istanbul, Turkey

N.Dökmetaş (2012), An Environmentally Friendly Method of Cutting and Forming of Materials by c-BN Coated Tools, 10th Global Conference, İstanbul, Turkey

N.Dökmetaş (2012), Cubic Boron Nitride (c-BN) Coatings, III. International Conference of Sustainable Life in Manufacturing, İstanbul, Turkey

Usta Y., Baker D., (2011), Modeling and Simulations of a 30 mwe Solar Electric Generating System Using Parabolic Trough Collectors in Turkey, THE 6th INTERNATIONAL GREEN ENERGY CONFERENCE, Eskişehir, Turkey

Yalcin S., (2011), Analysis and Modeling of Plastic Wrinkling in Deep Drawing,, 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds , Ankara, TURKEY, pp. 51-56

Özel T., Thepsonthi T., Ulutan D., (2011), Micro-Milling of Ti-6Al-4V Alloy with Uncoated and cBN Coated Micro-Tools, 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, TURKEY, pp. 243-248

Kaftanoğlu B., Şanay B. (2011), Prediction of Plastic Instability and Forming Limits in Sheet Metal Forming, International Conference on Technology of Plasticity, ICTP, Aachen, Germany, pp. 927-933

Kaftanoğlu B., Cesur H. (2009), An Experimental Study about CBN Formation for Cutting Tools, 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, KUŞADASI, AYDIN, pp.257-261

Kaftanoğlu B., Cesur H. (2009), Machining Performance of CBN Coated Cutting Tools for Die/Mold Applications, 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, KUŞADASI, AYDIN, pp.263-267

Kaftanoğlu B., Baker D.K. (2008), Trends In Cop For Adsorption Cooling Cycles With Thermal Regeneration And Finite Number Of Beds, ASME Energy Sustainability 2008, FLORIDA

Kaftanoğlu B., Fırat M., Livatyali H. (2008), On the Analysis of Simple Shear Deformation with a Consideration of Plastic Anisotropy, Proc. of Int. Conf. of Tech. of Plasticity, Gyeongju

Kaftanoğlu B., Pişkin M.A. (2007), Computer Aided Modeling of Deep-Drawing, 12 th International Conference on Sheet Metal(SheMet’07), PALERMO,

Kaftanoğlu B., Pişkin M.A. (2007), Modeling of Deep-Drawing by Finite Element Method for Die Design, 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, ÇEŞME-İZMİR, pp.43-48

Kaftanoğlu B., Baker D.K. (2007), Limits to the Thermodynamic Performance of a Thermal Wave Adsorption Cooling Cycle, 5 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2007), SUN CITY,

Kaftanoğlu B., Firat M., Eser O. (2006), Improving the Accuracy of Stamping Analyses Including Springback Deformations, ICAFT ConferencE, Stadthalle Chemnit

National Conference Proceedings

Şahin E., Albayrak K., Biçkes A., Başeşme E., (2012), Endüstriyel Tip Elektro Hidrolik Vakumlu Süpürücünün İmalatı,, OTEKON’12, 6. Otomotiv Teknolojileri Kongresi , pp: 186

Kaftanoğlu B. (2012), CBN Kaplama Teknolojisi ve Uygulamaları, BOR Çalıştayı

Kaftanoğlu B. (2012), Malzemelerin ve Kaplamaların Yüzey Özelliklerini Belirleme Teknolojileri, III. İleri Teknoloji Çalıştayı, İstanbul, Turkey

Dökmetaş N., (2012), Kübik Bor Nitrür (CBN) Kaplamalar, III. Ulusal Talaşlı İmalat Sempozyumu

Cesur H., Dökmetaş N., (2011), Kübik Bor Nitrür (CBN) Kaplamalar, İleri Teknolojiler Çalıştayı, pp: 39-41

Kaftanoğlu B., Aygün B.,Albayrak K., Biçkes A., Başeşme E., Dursun M., (2009), Endüstriyel Tip Vakumlu Süpürücünün Kavramsal Tasarımı, 11. Otomotiv Sempozyumu, BURSA

Kaftanoğlu B., Karen I., Kaya N., Öztürk F., Mitmit C., Polat E. (2009), Topology Based Structural Die Design Optimization Technique for Sheet Metal Stamping in the Automotive Industry, 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, KUŞADASI, AYDIN, pp.15-21

Kaftanoğlu B., Taylan O., Baker D.K. (2009), Parametric Study and Seasonal Simulations of a Solar Powered Adsorption Cooling System, ECOS 2009, 22nd International Conference on Efficiency. Cost, Optimization, Simulation and Environmental Impact of Energy System, Foz do Iguacu, Parana, pp.833-842

Cengiz M.C., Doğan B. (2007), Bir Endüstriyel Robot ve Robot Eli Geliştirilmesi, 13. Ulusal Makina Teorisi Sempozyum, SİVAS, pp.1-12

Kaftanoğlu B., Baker D.K. (2006), Güneş Enerjisi ile Çalışan Adsorplanma Soğutma Sisteminden Maksimum Teorik Başarım Sağlanmas, VI.Ulusal Temiz Enerji Sempozyumu, ISPARTA, pp.105-114

Kaftanoğlu B., Baker D.K. (2006), Güneş enerjisi ile çalışan adsorblanmalı bir soğutma sisteminde zeolit ve silika jel kullanılımında termodinamik ve ekonomik başarımın karşılaştırılmasI, Türkiye 10. Enerji Kongresi ve Uluslararası 5. Enerji Fuarı, İSTANBUL, PP.27-30